Structural Engineering Beam Frame Calculators API

Structural EngineeringBeamTrussFrameSection Propertiesx402MCPOpenAPI

Beam, truss and frame analysis, section properties, column buckling, load combinations, bolt and weld groups, footing bearing, retaining-wall stability, concrete flexure, composite transformed sections, deflection checks and tributary load takedown — pure numeric methods on caller inputs.

POST/api/v1/structural-calcs/beam-analysis$0.04 USDC

Euler-Bernoulli FEM for simply supported, cantilever, fixed and continuous beams with point, UDL, linear and moment loads.

POST/api/v1/structural-calcs/section-properties$0.03 USDC

Area, centroid, second moments, elastic/plastic moduli, radii of gyration and torsion constant for standard shapes or polygons with holes.

POST/api/v1/structural-calcs/column-buckling$0.02 USDC

Elastic Euler and inelastic Johnson-parabola critical stress/load for a pin-ended equivalent column with caller K.

POST/api/v1/structural-calcs/load-combinations$0.01 USDC

Combine caller load-case results with caller factors and report the governing combination per result key.

POST/api/v1/structural-calcs/truss-2d-analysis$0.04 USDC

Direct-stiffness truss analysis returning member axial forces, support reactions and joint displacements.

POST/api/v1/structural-calcs/frame-2d-analysis$0.05 USDC

Euler-Bernoulli frame analysis with optional moment releases, nodal and member loads, returning displacements, reactions and member end forces.

POST/api/v1/structural-calcs/bolt-group-eccentric$0.02 USDC

Elastic-method force distribution in an in-plane eccentrically loaded bolt group.

POST/api/v1/structural-calcs/weld-group-analysis$0.02 USDC

Elastic line-weld analysis of an eccentrically loaded weld group returning maximum force per unit length.

POST/api/v1/structural-calcs/footing-bearing-pressure$0.03 USDC

Soil bearing pressure under a rectangular footing with axial load and moments, including partial uplift.

POST/api/v1/structural-calcs/retaining-wall-stability$0.03 USDC

Overturning, sliding and bearing checks for a cantilever retaining wall with Rankine or Coulomb active pressure.

POST/api/v1/structural-calcs/concrete-rect-flexure$0.03 USDC

Nominal flexural strength of a singly or doubly reinforced rectangular section with caller stress-block parameters.

POST/api/v1/structural-calcs/composite-section-transform$0.03 USDC

Modular-ratio transformed-section properties and stresses for multi-material sections, optionally cracked.

POST/api/v1/structural-calcs/deflection-limit-check$0.01 USDC

Compare computed deflections with caller span/deflection limits and optional long-term multipliers.

POST/api/v1/structural-calcs/tributary-load-takedown$0.02 USDC

Tributary areas on a rectangular grid (or caller polygons) with cumulative dead/live takedown over floors.